FX10 Series 0.5mm Pitch Connectors for Board-to-Board Connections

Manufacturer's part number :


Manufacturer Hirose


Description :

The Hirose FX10 series of board to board connectors has been designed to incorporate an optional ground plate to improve signal transmission characteristics. Signal and ground are arranged in a ratio of 10:1 with the ground plate SMT connected to the board. The ground stability achieved serves to reduce noise. The series has a pitch of 0.5mm and a stacking height of either 4mm or 5mm. When specified without a ground plate the number of signal positions is increased. The series has the capacity to accept 10 Gbps transmission speed making them suitable for SATA, USB 2.0 and PCI express applications.

Configuration: Header; No Ground plate; No Locating boss; Metal holddown; Changed Finish NOTE: The HIROSE product information on this website is for reference only. Please request the Engineering Drawing for the most current and accurate design information from your local Acal BFI sales office.

View our wide range of Board-to-Board products

View our portfolio of Connectors / Cables

See all products from our supplier Hirose



Technical Data :

  • Quote and availability


  • Connectors incorporating a ground plate for board-to-board connections.
  • Signal and ground are arranged in a ratio of 10 to 1 with the ground plate SMT directly connected to the board.
  • Reinforced fittings provide greater adhesion to the board, protecting against solder peeling and ensuring a stronger ground.
  • Signal contact spacing of 0.5mm produces a smaller connector supporting high-density PCB mounting.
  • Mating length of the contact part (signal contacts) is 1.1mm.
Features Similar products
Product Series FX10  

  similar products found

Search similar products
Connector Type Male  
Number of Positions 144  
Number of Rows 2  
Termination Surface mount  
PCB Mounting Orientation Vertical  
Stack Height (mm) 5  
Centreline (mm) 0.5  
Typical Data Rate 10  
Pitch (mm) 0.5  
Orientation Parallel